mowin Posted December 12, 2024 Posted December 12, 2024 The good. CVA optima no scope, and a TC omega with a 3x9x40 TC scope. The bad.. they have been shot and never cleaned. I can open the CVA, but not the TC. Looking like I've got scope, rings and stocks. Looks like the rest is scrap. grampy and Caeden4 2
mlamm24 Posted December 12, 2024 Posted December 12, 2024 How's the cva barrel? It's gotta be pretty bad to be useless.
mowin Posted December 12, 2024 Author Posted December 12, 2024 1 minute ago, mlamm24 said: How's the cva barrel? It's gotta be pretty bad to be useless. Haven't tried to remove the plug. Going to spray some WD 40 down the muzzle and let it soak a few days. If it looks like the plug end, or the muzzle, it's not good.
Lawdwaz Posted December 12, 2024 Posted December 12, 2024 Like an old friend used to say……”chicken chow mein’. Junk…….. mowin 1
The Back 40 Posted December 12, 2024 Posted December 12, 2024 Is that due to the corrosiveness of the powder? Do all of the powders do that? I've never owned a ML.
mowin Posted December 12, 2024 Author Posted December 12, 2024 (edited) 9 minutes ago, The Back 40 said: Is that due to the corrosiveness of the powder? Do all of the powders do that? I've never owned a ML. Ya, black powder and black powder supplements are highly corrosive. Buckhorn 209 is about the cleanest burning you can get before going to a smokless powder ML. Edited December 12, 2024 by mowin cervidchasers and Splitear 2
Splitear Posted December 12, 2024 Posted December 12, 2024 That sucks. It’s all but impossible to salvage a sewer pipe barrel. You can probably find some barrels and be money ahead since they were given to you. mowin and Caeden4 2
Rob-c Posted December 13, 2024 Posted December 13, 2024 (edited) 55 minutes ago, mowin said: Haven't tried to remove the plug. Going to spray some WD 40 down the muzzle and let it soak a few days. If it looks like the plug end, or the muzzle, it's not good. First , who would do that? Second , wd40 wont do much if anything . If you wanted to put forth the effort , i would do a 50/50 mix of acetone and dex/ mercon transmission fluid. Plug off the primmer hole stand em up and fill the barrels, plug the business end and let them sit for a week . 50 mix Edited December 13, 2024 by Rob-c LET EM GROW, Spaceman Spiff, mowin and 1 other 1 3
2BuckBizCT Posted December 13, 2024 Posted December 13, 2024 Sell them as gently used for $100 total? mowin, ATbuckhunter and ZAG 1 2
GreeneHunter Posted December 13, 2024 Posted December 13, 2024 Either would look good on the wall ... just sayin !
Caeden4 Posted December 13, 2024 Posted December 13, 2024 4 minutes ago, 2BuckBizCT said: Sell them as gently used for $100 total? "only fired once!" ... no comment about the cleaning though haha cervidchasers 1
Chef Posted December 13, 2024 Posted December 13, 2024 If run a copper brush and some ballistol and see what it looks like after mowin 1
Wolc123 Posted December 13, 2024 Posted December 13, 2024 Would you sell the Omega stock ? I’m not sure if the current Gorilla glue repair on mine will stand up another soaker of a Holiday season.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now